Announcement Announcement Module
Collapse
No announcement yet.
Idle control Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Idle control

    Anybody know where idle control comes from? Mines fucked ATM. It pulses on revs higher and lower then stalls. I've got a feeling that some of the wires at the actual ecu might be damaged from people kicking it...

  • #2
    if the adapt controlling the fly by wire or is the stock ECU doing it?

    Comment


    • #3
      its the stocky controlling the fly by wire but the adaptronic intercepts the signal somewhere i think.

      Comment


      • #4
        Blake,
        I had a problem like that.
        The wires rubbed thru where they went over the edge of the Adapt ECU,
        because of people kicking it or putting their feet on it.
        It needs a cover like the one we took off to mount the Adapt.

        Comment


        • #5
          Originally posted by MYZ27AG View Post
          Blake,
          I had a problem like that.
          The wires rubbed thru where they went over the edge of the Adapt ECU,
          because of people kicking it or putting their feet on it.
          It needs a cover like the one we took off to mount the Adapt.
          Yeah no matter how many times you tell people, they still kick it.

          It wasnt having any issues this morning. Makes me wonder whether its heat related or the wires are now touching again.

          Comment


          • #6
            That is how mine was.
            I would stop pull the harness out of the way.
            But a few days later.
            Then I found the problem where the wire was shorting onto the ecu
            So I moved it and rerouted all the wires and got rid of wires i didn't use.
            Like launch control which I never used, valet in fact anything that wasn't necessary.

            But don't rule out that bloody sharing board.
            I still think it is one of the problems that we have.

            Get a new one from Adapt. Andy had a newer version I think
            because Matt had to do some circuit alterations on our boards.
            Take it out of that silly box and mount it away from the resistor packs
            which also should be kept cooler than in that box.
            My sharing board and resistor pack was cooked.

            Comment


            • #7
              Im starting to get the shits with it. What makes it worse is i cant check out the ecu via the computer cause my laptop is fucked now. I might pull the tape apart tonight on the loom and give it a look over. blast it with some contact cleaner etc.

              The sharing board shit hasnt been an issue of late though. i.e. havent lost gauges and all that shit like i used to.

              Comment

              Working...
              X