Announcement Announcement Module
Collapse
No announcement yet.
Turbo Guide - (www.ctfsg.com) Page Title Module
Move Remove Collapse
This is a sticky topic.
X
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Thread revival ftw!

    Found this DIY write-up on rebuilding turbos I was given a copy of many moons ago, for anyone who wants to do any work to a turbo they are upgrading to etc.
    May be handy for those that want to do a DIY teardown to get a turbo flowed for better performance etc, without having to pay extra man hours for a shop to do it.

    http://dl.dropbox.com/u/11194050/Turbo%20rebuild.doc

    Comment


    • #32
      Newbie

      How to be a member of ctfsg n wers the meet ups?

      Comment


      • #33
        hi my friends
        I ve got a stock ralliart and I want open my boost 1.2 what can I do ?
        thanks ...

        Comment


        • #34
          hi my friends
          I ve got a stock ralliart and I want open my boost 1.2 what can I do ?
          thanks ...

          Comment


          • #35
            Remove the restrictor pill in the boost control solenoid, and run a gated/bleed type mbc. I think ~17psi is 1bar, you might want to consider a reflash also to tidy afr and timing.

            Comment


            • #36
              do I need change westgate and ıntercooler ?
              what is the afr ?
              thank you for the answers..

              Comment


              • #37
                1 bar is 14.5psi

                AFR = air fuel ratio (only dangerous if it runs too lean...)

                stock cooler and wastegate are fine but you can get some more boost by tightening up the wastegate solenoid arm...

                Comment


                • #38
                  thanks my friend

                  Comment


                  • #39
                    have you got a picture where open westagete psi ?

                    Comment


                    • #40
                      Originally posted by fauxpas View Post
                      1 bar is 14.5psi

                      AFR = air fuel ratio (only dangerous if it runs too lean...)

                      stock cooler and wastegate are fine but you can get some more boost by tightening up the wastegate solenoid arm...
                      its not good if its to rich either.

                      Comment


                      • #41
                        Could someone tell me which vehicle the IHI RHF5 was taken from?

                        Cheers

                        Comment

                        Working...
                        X