Remove Stereo Fascia?

[GucciPiggy]

Hey guys. Has anyone so far been successful in removing the dashboard fascia to allow the stereo to be changed. I have been searching but can't find any information relating to this??

[ckwan028]

I have changed mine... just hard to explain how to do it..

First, remove the big centre piece of plastic from the dashboard (just lift it up)

then remove the 2 silver (or red) long strip which sit on the left and right of the radio

There are around 3 screws from each side (cant remeber exactly how many)

Then u can jusr unscrew the unit out of the dash

[rukboy11]

Did u end up managing to do this g-piggy? would like some pics on how to rip off that fascia? did u need to buy a new bracket to install the single dinn? and i assume u got the pocket?

[ckwan028]

Here it is

[GucciPiggy]

Hey thanks for taking the time to post this. I actually figured it out myself the other day but I am sure these pics will come in handy for others. I already had the bracket and pocket as my car came with the single Din stereo.

I think this is one of the most intelligently constructed dashes I have come across. So easy to pull apart once you remove the top section and easy to put back together. Having everything screwed also minimises rattles.

[rukboy11]

so the top section just use a screw driver to pop it up? im assuming its held by clips?

[ckwan028]

so the top section just use a screw driver to pop it up? im assuming its held by clips?


Yes. You dont even need a screw driver. Just bare hands will do

[GavinTan]

Where did you obtain your pocket from if you don't mind me asking? The pocket I got doesnt fit well and there are gaps around the pocket. I've also looked for pockets with a lid/cover but could not find one.

[ckwan028]

If you are refering to the one below the head unit.. it is just standard.
Mine is only a XLS, not Rcolt

[lovecolt]

Where did you obtain your pocket from if you don't mind me asking? The pocket I got doesnt fit well and there are gaps around the pocket. I've also looked for pockets with a lid/cover but could not find one.

If you are looking for pockets with lid/cover, you will have to go aftermarket. But aftermarket are all universal, hence the screwing point might not match up. Therefore, getting a OEM pocket is always the way to go. RColt doesn't have OEM pocket, hence you have to go for normal colts'

[GavinTan]

Thanks for the info...I got it done with a universal pocket. Wished that we had OEM's with a lid.