Coilover owners!

[Macca]

Whats your rear spring perch like?

Mine came with a bolt to bolt it to the torsion bar, which was solid, but I wanted the white line rear sway bar.

So like everyone else I have mounted it up the top. It looks dodgie as up there.

It sits on the raised portion of the chassis / spring mount, I threw the springs in and wound some pre load up so the spring cant fall out on full suspension drop (set it up at full drop on the jacks)

As you can see the base doesnt really sit on the chassis.

I have BC coilovers from the NZ (gold ones) Mine did not come with camber tops.

I see others did not come with the bolt to bolt this mount into the torsion bar.

So does every ones sit proud and on top of that hump on the spring mount?

Personally I have the rear spring set up like this, it means a heap of pre load is placed on the springs to get them safe so they dont fall out on full drop of the rear torsion bar.

I was thinking of getting a ring made up to hold the spring perch better

PIXXX

http://i169.photobucket.com/albums/u236/Macca_gong/IMG_0974.jpg

Yes I did lock the 2nd ring after I took that pic HAHA

[Ayu452]

tein are upside down...i haven't had issues...found this rough photo when i did my rear rotors
macca chk your fb for better photo

http://1.bp.blogspot.com/-OywLXcOFkaE/TbFBYzaKqMI/AAAAAAAAAyo/Wrl5DfoItsM/s1600/DTL_4648.jpg

[Macca]

l every one has them mounted with the spring perch up the top, Im the only one who did it with it down the bottom.

In the facebook pic, yours has a nice rubber seat which the perch sits on.

[skyrex]

Just mentioned on Ayu's facespace the BC's I have also are like yours (naturally being same brand). I have the V1-VA or whatever they are. Rowans old ones lol.
mentioned it would be better to use the lower shock bolt as an endlink mount point. My old mirages swaybar was like that.

[Macca]

Yeh it would have been, but thats not how whiteline designed it lol