New member from the UK

[Evo power]

Hello, my names Josh and im from England thought i would join here to get advice and meet people who like the same car as me. Im currently the owner of a Colt CZT which will soon have the R body kit on it :D.

Current spec is...
-Forge hard pipe with forge silicone joiners
-Forge blow off valve
-Greedy FMIC with samco hoses
-K&N air filter
-Janspeed full 2.7" exhaust system straight through with no centre box
-2.7" Custom decat
-Forge red silicone coolant hoses
-Samco oil breather pipe
-Autobahn 88 manifold and heat wrap
-Stainless downpipe
-Engine cover resprayed
-Evo low-temp thermostat
-Evo oil filter
-Walbro 255lph fuel pump
-SARD fuel pressure regulator
-Braided fuel lines
-BOSH 550cc injectors
-Single plate race clutch
-ECU remap by Redline
-One off custom coilovers made by ISC N1 fully adjustable
-Front strut brace
-Brembo drilled and grooved brakes all round
-Do-LUCK Braided brake lines with yellow stuff pads
-Custom one of boost gauge holder on A pillar
-3xProsport gauges
-Scanguage 2
-Custom traction control cut off switch
-Upgraded speakers
-Rear seats and plastics removed

Currently has two boost settings

1) 1bar of boost producing 230bhp & 290flbt
2) 1.3bar of boost producing 265 & 320flbt

In the next coming months its going to have a...
-Custom one-off racing radiator
-air filter relocated to the front bumper
-Full R-body kit custom made to fit
-New rims undecided to which ones
-Evo 9 bucket seats
-Rear strut brace and polybushed
-Respray.

Will upload pictures shortly as i cant get access to them now.

[corrie]

Sounds good Josh. Looking forward to them pics especially with the custom body kit ( :

[Evo power]

Cheers corrie havnt got the kit on yet still sourcing a few parts. But will have pics of how it stands now :)

[colTwes]

welcome!
very nice list you got there

[LG1]

pics , pics , pics when your ready.

welcome..

LG1

[kalt]

Welcome aboard :) Big list of mods there!

[Mitsiman]

Nice list of mods there - assuming yours is ecutek tuned?

[colTwes]

Nice list of mods there - assuming yours is ecutek tuned?

i would also like to know:D

[Evo power]

Well as promised pictures :) and yes mitsiman ecutek tuned £550 map :(


http://i615.photobucket.com/albums/tt239/wenlock/coltsideon.jpg
http://i615.photobucket.com/albums/tt239/wenlock/coltfrontcar.jpg
http://i615.photobucket.com/albums/tt239/wenlock/230287_145169758884779_100001752665545_261895_7769 567_n.jpg
http://i615.photobucket.com/albums/tt239/wenlock/221775_145168202218268_100001752665545_261848_1735 891_n.jpg
http://i615.photobucket.com/albums/tt239/wenlock/225942_145169568884798_100001752665545_261886_3846 030_n.jpg
http://i615.photobucket.com/albums/tt239/wenlock/223080_145170445551377_100001752665545_261900_5416 050_n.jpg
http://i615.photobucket.com/albums/tt239/wenlock/225786_145167595551662_100001752665545_261835_7792 610_n.jpg

[leeCZT]

welcome fellow ctz owner. Nice car apart from the holes in bumper makes no difference to air flow doing that as the slam bar is behind the holes, so the only thing your cooling down is that.

I know the car from CZTOC and i think danny is mates with the old owner, those figure are a bit loose and think it was confirmed by the ex owner that the cars not producing 260bhp even on 1.3 bar that would be putting serious strain on your internals!! besides the Stock turbo will last your a week if you kept it on high boost. What boost controller are you running ?

No if you fancy solid power and be safe, do what ive done, forge the block and run bigger turbo! the tdo4 or VF035 like ive got! larger compressor. Having a FPR on stock internals is shocking and not advised, you will be constantly washing the oil of the bore and pistions with neat fuel!! Im running 260 on 1.1 bar & high boost on 1.3 its pushing 307 bhp thats with lots of porting aswell as custom downpipe, 550 injectors, walbro fuel pump, filter, XR1 dump valve etc. Its also well worth fitting LSD if you wana put the power down properly.

Also like above has the car been mapped by a ECUTEK dealer?

Dont mean to sound harsh but i know the cars not pushing those figures and the 320ft is way off mate.

If you need any help just give me a shout

[Kenobi]

Yes this car is ECUTEK mapped.

Its a great car I've had a hand in supplying parts for. Its fast i know that.

Just out of interest Josh, Htec Elite Performance Ltd are now mapping Both the CZT and the Ralliart (cha ching!) So we would love to see yours for a tweek on the cheap.

FAO LeeCzt, i hate to do this but im very suprised your questioning Josh's figures. Your car made 306bhp on one of three runs and it made 236bhp on one of those. Now thats Loose. ;)

(no Czt's where hurt during the making of this statement)

[Evo power]

Cheers kenobi will defo be interested in having a tweek as im thinking of doing bit extra work to it. As for the figures these were what i was quoted, but from owning past fast cars i can defo say them figures are close to what its running also the scangauge read 233bhp on 1bar the other night in 4th gear.

From what iv heard from dave, kenobi your a great help so hopefully get to deal with you as well in the same manor.

[leeCZT]

Yes this car is ECUTEK mapped.

Its a great car I've had a hand in supplying parts for. Its fast i know that.

Just out of interest Josh, Htec Elite Performance Ltd are now mapping Both the CZT and the Ralliart (cha ching!) So we would love to see yours for a tweek on the cheap.

FAO LeeCzt, i hate to do this but im very suprised your questioning Josh's figures. Your car made 306bhp on one of three runs and it made 236bhp on one of those. Now thats Loose. ;)

(no Czt's where hurt during the making of this statement)

No harm done mate. Im Just interested as are you in my figures lol - like we have spoke about look out for the vid on you tube soon ;-0