PDA

View Full Version : Colt Rims


Steve-B
08-01-2007, 11:10 AM
Hey Guys,
I know the colt r has 16's and are a 4 stud pattern, but how can i tell if its a 4x100 or a 4x114.3 pattern ?
looking at getting some jap rims and i kinda need to know what stud pattern I have.
Cheers
Steve
lovecolt
08-01-2007, 11:55 AM
Its 4x114.3 the last time i measured it. But i will double check later
tingtw
08-01-2007, 03:02 PM
Its 4 x 114.3mm. I've already changed my rims.
Steve-B
09-01-2007, 10:40 AM
are you the guy that put the volks on ?
was looking at them or some works rims.
want something with abit of dish, but not too keen on getting offset rims again. had them on the supra and they were a pain in the arse to change.
cheers
steve
rukboy11
09-01-2007, 10:49 AM
ting and steve can we see pics of your cars with the rims on...(steve once u have them on) :)
tingtw
09-01-2007, 01:49 PM
ting and steve can we see pics of your cars with the rims on...(steve once u have them on) :)

You can see my car under the pics section.
tingtw
09-01-2007, 01:52 PM
are you the guy that put the volks on ?
was looking at them or some works rims.
want something with abit of dish, but not too keen on getting offset rims again. had them on the supra and they were a pain in the arse to change.
cheers
steve

Yes, waited for 3 months for the rims to reach me from RAYS factory. RAYS factory sprayed to gunmetal silver. As you know, TE37 only comes in white or bronze. They just introduced the Titanium Gunmetal for the TE37 06 model.

Wow, where's your Supra now? There're less than 5 Supra here in Singapore.
Steve-B
12-02-2007, 07:50 PM
http://i5.photobucket.com/albums/y169/devilrolla12345/117_1706.jpg
had to sell it, it was getting abit past the used by date. Guy that bought it wrote it off after having it for a week.
Bugger !
Chipokae
25-02-2007, 10:04 AM
Does anyone know what our offset for the stock rims are?
rebbot
25-02-2007, 05:09 PM
Does anyone know what our offset for the stock rims are?

If I am not wrong, I think the offset is +43. :)
Chipokae
27-02-2007, 11:31 PM
Thank you rebbot. Can anyone verify this?
TORNEO
28-02-2007, 12:43 PM
The offset is +43, don't change the one bigger then this, otherwise you cannot low down the car.
Also, Colt Version R is 4x114.3
tingtw
01-03-2007, 04:08 AM
Version-R stock rim is 16 x 6.5JJ +43. You can see this info at the back of the wheel.

Its manufactured by ASA.
octap
03-03-2007, 05:34 AM
If I am not wrong, I think the offset is +43. :)

Isn't this +45?
lovecolt
03-03-2007, 08:12 AM
Isn't this +45?

The rims on CZT might be different from Version R's. But yes, the offset of Version R rims is +43
TORNEO
04-03-2007, 09:11 PM
Original rims offset is +46, but +43 is the best.
Chipokae
04-03-2007, 10:09 PM
It seems the original offset for Rcolt rims are actually +43. Ive been looking into getting Buddy club P1 SF rims. they weigh approx 7.5kgs each and fit our cars as these trial fitting photos show.

http://i123.photobucket.com/albums/o306/Chipokae/P1040258.jpg

http://i123.photobucket.com/albums/o306/Chipokae/P1040248.jpg

http://i123.photobucket.com/albums/o306/Chipokae/P1040235.jpg

http://i123.photobucket.com/albums/o306/Chipokae/P1040240.jpg


So im looking for other interested parties in a group buy for getting these rims. If anyone is interested please let me know. We will be looking at pretty good discount for these rims if we can get the numbers up.

here is a link for the buddyclub website.

http://www.buddyclub.com.au/buddyclub/top_m.html
|2colt
04-03-2007, 11:04 PM
I would be interested in getting some buddyclubz. They look sweet.:)
TORNEO
05-03-2007, 12:50 PM
It seems you are using 16inch for this P1.
Under the application of Buddy Club, the offset of 16x114.3 7J is +45, so it is fit for your Colt.
Chipokae
05-03-2007, 04:57 PM
l2colt, they also come in a limited edition matte black colour. its niiiice! but matte black wont suit my car. its either white of grey for me. i like the grey ones better. the white ones stand out too much.
|2colt
05-03-2007, 06:31 PM
Well my car is red so i dont know what look i want. White will stand out and looks cool but then again grey and matte black will give the "i cant see his rims look":) If only i had photoshop skills lol
Keith Anderson
05-03-2007, 10:07 PM
Just messing around with the rims you guys liked, A little rough but if you have a image of your car, a good one will do a rework in your colour
Chipokae
06-03-2007, 12:09 AM
WOW thats some pretty nice work there with the photo. Anyone else like the look of these rims? we're looking for interested parties to get a group buy together.
|2colt
06-03-2007, 09:14 PM
hey nice work...well my car is the exact same colour as the pic u have put on:)
lovecolt
06-03-2007, 09:21 PM
looking good....pity i don't have any money for rims :(
27AME
07-03-2007, 01:10 PM
I'm interested in some matte black P1's?
Chipokae
07-03-2007, 09:54 PM
Thanks for the interest 27ame.
Come on guys we need more than just the one other person interested in these rims. not much of a group buy with the whole 2 of us. Come on come on, you know you want them! :D
lovecolt
07-03-2007, 10:41 PM
You could at least post up a price, Jeff. :p
27AME
07-03-2007, 10:58 PM
Just looked at the website mate, I would be more keen on a set of P1 QF's rather than the SF's!!!
Chipokae
22-03-2007, 11:35 AM
hi guys, sorry its been so long a wait for me to get back to you guys, but i'm going to go check out 5Zigen as well. I'll get back to you all when i have more info. im planning to go this weekend. 27AME, i would LOVE some QFs but they are a little out of my price range. QFs are almost double the price. For the set of 16s SFs if we group buy i think we can get them for about 1100. thats what he told me but i think we can do better.
Anyway, i'll check out 5Zigen and get back to you all. Again apologies for the long delay.